Can an electric front loader really replace a diesel machine on a small site? For many tasks, it can. The YG unit carries a 0.8-ton rated load and a 0.3 m³ bucket. It runs on a 72V battery system for 4 to 5 hours of work. Because it burns no fuel, it suits warehouses, farms, and urban worksites. It also stays quiet enough for noise-sensitive areas. This guide covers specifications, working principle, diesel comparison, and buying factors.
YG Electric Front Loader Parameters
| Category | Item | Value |
|---|---|---|
| Performance | Rated load | 0.8 t |
| Bucket rated capacity | 0.3 m³ | |
| Dumping height (at 45°) | 1780 mm | |
| Lifting height | 3140 mm | |
| Dumping reach | 980 mm | |
| Max. lifting weight | 600 kg | |
| Max. excavation force | 1000 kN | |
| Max. gradeability | 30° | |
| Max. turning angle | 38°±1 | |
| Rear axle swing | 7° | |
| Dimensions & Weight | Overall length (bucket on ground) | 3840 mm |
| Overall width | 1160 mm | |
| Overall height | 2330 mm | |
| Wheel base | 850 mm | |
| Min. ground clearance | 240 mm | |
| Net weight | 1980 kg | |
| Turning radius | 2610 mm | |
| Battery | Battery model | 6-EVF-203A |
| Rated capacity (3 h) | 200Ah | |
| Battery groups | 12 | |
| Rated voltage | 72V | |
| Working hours | 4-5 h | |
| Transmission System | Hydraulic motor | CBHV, 72V, 5000W, 18 ml/r |
| Tyre type | 26*1200-12 | |
| Tyre working pressure | 0.3 MPa | |
| Drive power | 4000W |
Get Factory Quote | WhatsApp/Tel: +86 183 3715 2861
How Does an Electric Front Loader Work?
An electric loader replaces the diesel engine with a battery and motors. The YG battery pack uses 12 groups rated at 72V and 200Ah. Power then flows to two systems. One motor drives the hydraulic pump. The other drives the wheels. The hydraulic motor is rated at 5000W with 18 ml/r displacement. This pump lifts the boom and tilts the bucket. The drive system is rated at 4000W.
Full hydraulic steering gives smooth and precise control. The maximum turning angle reaches 38°, and the rear axle swings 7°. This helps the machine keep traction on uneven ground. Ground clearance is 240mm, and the loader climbs grades up to 30°.
Why does this layout matter? Electric drive delivers torque without engine warm-up. Operators can start work the moment they sit down. The machine also has fewer moving parts than a combustion engine. Fewer parts mean fewer routine service items. That keeps downtime low on busy sites.
Electric Wheel Loader for Sale: Which Industries Benefit Most?
Many buyers search for an electric wheel loader for sale after a specific site problem. Diesel exhaust may be banned indoors. Noise limits may restrict work hours. Fuel costs may be hard to predict. Electric power addresses all three issues at once.
Here are the industries where this machine fits best:
- Construction: Moves sand, gravel, bricks, and mortar on tight sites
- Agriculture: Handles feed, fertilizer, hay, and harvested crops near livestock
- Warehousing: Loads and unloads goods without exhaust indoors
- Landscaping and municipal work: Carries soil, mulch, and gravel in parks and streets
- Manufacturing: Supports indoor material handling in plants and workshops
The 0.3 m³ bucket suits daily loading of light and medium materials. It is not meant for heavy quarry work. Match the bucket size to your typical load before you buy. This avoids overloading and protects the hydraulic system.
Where Does an Electric Front Loader Work Best? A Daily Site Scenario
Picture a food-processing warehouse with narrow aisles and closed doors. Diesel exhaust is not allowed indoors. Bulk material arrives at the dock each morning. It must reach the storage bays before the production line starts.
An electric front loader suits this routine well. The 1160mm overall width passes through standard aisles. The 2610mm turning radius helps in corners and loading bays. The 0.3 m³ bucket moves bulk material in repeated short trips. Its 1780mm dumping height also clears most hoppers and small truck beds.
A typical workday can follow this pattern:
- Morning block: Move bulk material from the dock to storage bays
- Break period: Park the loader and recharge the 72V battery
- Afternoon block: Refill hoppers and clear the yard area
The 4-5 hour runtime fits one work block well. A planned charging break then prepares the machine for the next block. Operators avoid fuel storage, refueling stops, and exhaust ventilation. The machine also stays quiet enough for staff working nearby.
The same pattern applies on other sites. Greenhouses use it to move soil and compost. Poultry and livestock farms use it for feed and bedding. Workshop yards use it to carry sand, gravel, and packed goods. In each case, low noise and zero exhaust remove the main limits of diesel power.
Electric Wheel Loader vs Diesel Loader: Which Fits Your Budget?
The electric wheel loader vs diesel loader question depends on your site and shifts. Neither type wins in every case. Use the points below to compare them fairly.
- Power source: Electric models use battery motors. Diesel models use combustion engines.
- Exhaust: Electric units produce no direct exhaust during operation.
- Noise: Electric drive runs more quietly, which helps operators and nearby workers.
- Maintenance: Electric drive removes engine oil changes and fuel system servicing.
- Energy cost: Electricity prices tend to be steadier than diesel prices.
- Runtime: Diesel refuels in minutes. Electric units need charging between shifts.
Diesel still suits long, continuous shifts without charging access. An electric loader suits sites with fixed hours and a nearby power supply. Ask yourself: how many hours does the machine run daily? If the answer is under five, electric power fits well. For longer days, plan a charging break or a second battery routine.
Mini Zero Emission Loader for Indoor and Urban Sites
A mini zero emission loader solves a problem that diesel machines cannot. It works inside closed spaces without adding exhaust fumes. This matters in warehouses, greenhouses, and factory halls. Workers breathe cleaner air during long shifts. Ventilation costs can also drop.
Compact size helps as well. The loader is 3840mm long and 1160mm wide. Its turning radius is only 2610mm. That lets it turn in narrow aisles and small yards. The machine weighs 1980kg, so it also puts less load on floors than heavier loaders.
For projects needing a tracked format, compare the electric mini track loader and electric mini skid steer. If you need digging as well as loading, review our compact backhoe loader. You can also browse the wider electric loader for sale range. Each option suits a different site layout.
Key Advantages of the YG Electric Front Loader
Every YG loader is checked before shipment. Hydraulic connections, steering, and battery output are tested together. This keeps performance consistent across batches. Below are the main advantages customers value.
- Quiet operation for urban, indoor, and livestock areas
- No direct exhaust emissions during work
- 4-5 hours of runtime from the 72V battery system
- Full hydraulic steering for precise control in tight spaces
- Fewer engine-related parts to service
- Compact frame for narrow doors, aisles, and yards
Special attachments and configurations are available on request. Tell us your material type and daily hours. Our engineers will recommend a suitable bucket and setup.
Get Your Free Electric Front Loader Quote Today
A good machine needs good support. Our team offers pre-sale consultation to match the loader to your site. We review your material, daily hours, and charging access. We also provide customized solutions for special attachments or configurations.
After delivery, technical support remains available for setup and operation. Spare parts, including batteries and hydraulic components, can be supplied. We give maintenance guidance to extend battery and pump life. This removes common risks of buying overseas equipment. You are not left without help after the order ships.
Choosing the right loader affects cost, comfort, and site productivity. YG Machinery offers a 0.8-ton electric loader built for compact work. Share your material type, daily hours, and destination country. We will recommend a configuration and prepare a custom quote. Contact YG Machinery now to request your free price and full specifications.
