An automatic wall plaster machine is a construction tool that applies cement, lime, or gypsum onto walls with little manual work. It is commonly used in residential buildings, schools, offices, and rural self-built houses. The machine moves up and down on its own, leaving a smooth and even surface. If you care about project speed and labor cost, knowing the automatic wall plaster machine price helps you make a smart choice. Contact YG Machinery for current pricing and model details.
YG Automatic Wall Plastering Machine Parameters
| Model | YG-800 | YG-1000 |
| Plastering height | Below 4 meters | Below 5 meters |
| Weight | 270 kg | 290 kg |
| Plastering thickness | 2~30 mm | 2~30 mm |
| Power | 1.5 KW | 1.5 KW |
| Plastering efficiency | 500 CBM/8H | 550 CBM/8H |
| Voltage | 220 v/380 v optional | 220 v/380 v optional |
How an Auto Wall Plastering Machine Works?
This machine uses a simple feeding and spreading system. The operator pours plaster mix into a large hopper. An internal rotor pushes the material through a hose to the plastering head. The head spreads the plaster evenly as the machine rides up along the wall. Once it reaches the top, it automatically comes back down. The operator only needs to guide the machine and refill the hopper. The thickness can be adjusted from 2mm to 30mm. This mechanism is much faster than manual plastering. It also produces a flatter wall with less material waste.
Key Features of a Cement Wall Plaster Machine
- Cuts raw material waste by over 20%. Less plaster falls to the floor, saving cement and sand. This directly lowers your material cost on every job. Many users recover the machine investment within months just from waste reduction.
- Easy to move between rooms with strong wheels. No part removal needed. You can roll it through standard doorways without any disassembly. The wheels are wide enough to handle debris and small bumps on site.
- Large hopper holds enough for a big wall section. No constant refilling. One worker can keep the machine running while another guides it. This setup keeps the plastering process continuous and efficient.
- A sensitive leakage protection device ensures safety in wet construction environments. The machine shuts off instantly if moisture contacts the electrical parts. You can use it next to fresh plaster and water sources without worry.
- Only one or two people needed to operate. Manual plastering would take three or four. You save on daily labor wages without slowing down production. Skilled workers are hard to find, but this machine works well with beginners.
- Plastering thickness stays consistent once set. No high or low spots. This gives you a smooth surface that requires less sanding and touch-up. The result is a finish that looks professional and passes inspection easily.
How to Operate and Maintain the Wall Plaster Removal Machine?
Operation:
The operation is simple. Place the machine in front of the wall. Connect power. Load plaster mix into the hopper. Turn the machine on. Use the handle or remote to control vertical movement. Let the machine go up and down automatically. Refill the hopper when low. Continue until the wall section is done.
Maintenance:
Clean the hopper and hose after each use. Dried plaster will cause blockages. Check the rotor and stator regularly. These are wear parts that need replacement after a certain number of hours. Keep the wheels clean. Inspect electrical cables for damage. Store the machine in a dry place when not in use. These simple steps will extend machine life and protect your investment.
Applications of the Wall Plaster Removal Machine
- Residential buildings: Interior walls of houses, apartments, and rural self-built homes. These projects need fast, clean results, and the machine delivers both. Homeowners are happy with the smooth finish and quicker construction time.
- Commercial buildings: Offices, schools, hotels, and factories. Large open areas and long corridors are finished much faster than by hand. The machine also works well on walls with many corners and door frames.
- Various wall substrates: Brick walls, concrete block walls, hollow walls, light body brick walls, and baking-free brick walls. The machine bonds well to all these surfaces without extra preparation. You do not need to change settings when moving between different wall types.
- Multiple plaster materials: Cement mortar, lime, gypsum, and foam mortar. You can switch between materials without buying different equipment. Just clean the hopper and hose, then load the next material to start plastering again.
Get Your Automatic Wall Plaster Machine Price From YG Machinery
YG Machinery is a professional manufacturer of automatic wall plaster machines. We build the YG-800 and YG-1000 from heavy-duty steel with durable wheels for easy movement across rough surfaces like gravel, concrete, or dusty floors. Every unit is pressure tested before shipping. The machine goes up and down automatically, applies plaster evenly, and cuts material waste by over 20%. Can you adjust the thickness from 2 mm to 30 mm? Need the right machine for your housing project? Just tell us your wall height, plaster material, and daily output in square meters. We will send you the best automatic wall plaster machine price and a practical recommendation within 24 hours. Contact YG today.
